Bangalore — Karnataka
Industrial Structures in Bangalore.
Industrial tensile structures cover loading docks, yards, staging areas, staff parking and walkways that have to stay open. In Bangalore, the design is driven by drainage for a long wet season. With a gentle climate, most projects are driven by span, daylight and architecture.
BDA Housing, BangaloreWhat makes industrial structures in Bangalore different?
Industrial roofs around the Peenya and Bommasandra belts are usually replacing or extending metal sheeting that drums in the rain and cooks the floor beneath it. A membrane roof over the same span runs cooler and quieter, and in Bangalore's mild climate the design is set by the clear span the plant needs rather than by any weather extreme. Hard gneiss under most of the industrial land takes shallow footings, which keeps the groundwork off the critical path.
In short
Reviewed October 2026
Do you build industrial structures in Bangalore?
Yes. Industrial tensile structures cover loading docks, yards, staging areas, staff parking and walkways that have to stay open. A membrane spans further on less steel than a sheeted shed, keeps columns out of vehicle routes and lets daylight through. Our group's largest single roof is about 20,000 m² for Siemens in Goa, built in roughly two months. For Bangalore specifically, drainage for a long wet season. With a gentle climate, most projects are driven by span, daylight and architecture sets the engineering, and pVDF-lacquered PVC is the default for corporate campuses; plain PVC can suit budget work in this climate.
- City
- Bangalore, Karnataka
- What drives it
- Drainage for a long wet season
- Usual membrane
- PVDF-lacquered PVC is the default for corporate campuses
- Price range
- ₹280–2,500 / sq ft + GST
- ISO 9001:2015Certified manufacturer
- Since 1998Building membrane structures
- One teamDesign, fabrication and installation
- In writing1-yr structure, 5–15-yr membrane warranty
- ItemisedQuote after a site survey
Designing for Bangalore
What the site does to the design.
The design wind pressure is worked out for your exact site under IS 875 (Part 3), from its terrain, height and exposure. We do not take a city figure off a list.
Moderate summers, rarely above the mid-30s °C, and cool nights.
About 970 mm of rain a year across two monsoons, June to September and October to November.
Lower UV and pollution than most large Indian cities.
- Ground
- Mostly hard gneiss and laterite, good to build on. Low-lying tank-bed areas need a proper soil investigation.
- What drives the design
- Drainage for a long wet season. With a gentle climate, most projects are driven by span, daylight and architecture.
- Membrane
- PVDF-lacquered PVC is the default for corporate campuses; plain PVC can suit budget work in this climate.
The structure
Industrial Structures in detail.
Cover for the spaces a plant has to keep open: docks, yards, staging areas, staff parking and the routes between blocks.
Everything about industrial structures- Largest single roof
- ≈ 20,000 m², Siemens Goa
- Working for plants
- Since 1998
- Underneath
- Daylit and open-sided
Almost every industrial enquiry is one of these six.
Which form suits the site.
Space that has to be covered but cannot be enclosed. That is most of an industrial site.
Loading docks
A roof over the dock face and truck standing area, so loading carries on through the monsoon. The span is set by how far back a reversing trailer needs headroom.
Staging and yard storage
Covered holding for inbound material, finished goods and packaging. Closed overhead, open on the sides for forklifts.
Staff car parking
Cantilever shades built as one repeating bay, so a 200-space lot is a production run, not a bespoke job.
Two-wheeler parking
Usually the largest single requirement on an Indian plant, with the column line kept out of the wheeling route.
Inter-block walkways
Covered routes between production, stores, canteen and admin, used every shift.
Gate and forecourt canopies
Gatehouse, weighbridge and reception covers: the first thing a visitor or auditor sees.
| Structure | Repeating cantilever or portal bays, barrel vaults, or a single large-span roof |
|---|---|
| Membrane | PVC-coated polyester for most areas; PVDF where dust and soiling make cleaning a concern |
| Frame | Galvanised steel; painted or duplex-coated in coastal and chemical atmospheres |
| Clearances | Set from truck, trailer and forklift movements, with columns kept out of the working routes |
| Foundations | Isolated pads in most ground; raft or piles where the soil calls for it |
| Warranty | One year on structure and workmanship; five to fifteen years on the membrane, by fabric grade |
What does industrial structures in Bangalore cost?
Most installed projects fall between ₹280 and ₹2,500 per sq ft plus GST, set by span, form, steel weight, foundations, membrane grade, height and site access. There is no flat Bangalore premium; distance and access appear only in the logistics line of an itemised quote.
Start a project
Covering something in Bangalore? Send us the size and the site.
Tell us where it is, roughly how big, and what it has to cover. We come back with questions, options and the next step, which is usually a site survey.
or call +91 93159 45187