Service areas — Assam
Tensile structures in Silchar.
Airport work in one of the wettest regions in the country.
Silchar AirportIn short
Reviewed October 2026
Does Ferrari Fabric build tensile structures in Silchar?
Yes. We have completed one project in Silchar: Silchar Airport. Every structure is fabricated in our Delhi NCR workshop and installed by our own crew. In Silchar, the design is driven by drainage comes first, followed by detailing for Zone V seismic loads. Most installed projects cost ₹280–2,500 per sq ft plus GST.
- Completed here
- 1 project
- Usual membrane
- PVDF-lacquered PVC
- Fabricated in
- Our Delhi NCR workshop
- Price range
- ₹280–2,500 / sq ft + GST
- ISO 9001:2015Certified manufacturer
- Since 1998Building membrane structures
- One teamDesign, fabrication and installation
- In writing1-yr structure, 5–15-yr membrane warranty
- ItemisedQuote after a site survey
Our work in Silchar
1 project completed here.
Silchar, Assam · 1,500–1,800 m² · About 2 months
Silchar Airport
A forecourt and walkway canopy along the frontage of a compact regional terminal, roughly 1,500–1,800 m². Silchar gets well over 2,000 mm of rain a year, so drainage came first.
Designing for Silchar
The climate sets the details.
We do not use a city wind figure off a list. The design wind pressure for your structure is worked out for the exact site under IS 875 (Part 3), from its terrain, height and exposure.
Well over 2,000 mm of rain a year, often in long, intense spells.
Violent thunderstorms with sharp gusts from March to May.
Warm and very humid most of the year.
- Ground
- Valley floors are often soft alluvium; foundations, sometimes piled, are sized from the soil investigation. Seismic Zone V, the most severe in India.
- What drives the design
- Drainage comes first, followed by detailing for Zone V seismic loads.
- Membrane
- PVDF-lacquered PVC; PTFE-glass for permanent or civic structures.
How we work in Silchar
One team, survey to handover.
Designed and fabricated at our Delhi NCR workshop, shipped, and installed by our own crew. No local subcontractors.
Most installed projects fall between ₹280 and ₹2,500 per sq ft plus GST. There is no flat Silchar premium; distance and site access only affect the logistics line of an itemised quote.
Built here
Questions
Building in Silchar.
The six things people ask before they send us a site, answered for Silchar rather than in general.
Yes. We have completed one project in Silchar — Silchar Airport — and you can see each of them on this site. Designed and fabricated at our Delhi NCR workshop, shipped, and installed by our own crew. No local subcontractors.
Drainage comes first, followed by detailing for Zone V seismic loads. Well over 2,000 mm of rain a year, often in long, intense spells. Violent thunderstorms with sharp gusts from March to May. The design wind pressure itself is worked out for your exact site under IS 875 (Part 3), from its terrain category, height and exposure — not taken from a figure against the city's name.
Valley floors are often soft alluvium; foundations, sometimes piled, are sized from the soil investigation. Seismic Zone V, the most severe in India. Footings are designed to IS 456 from the soil investigation for your plot, and on a tensile structure they are sized for the roof trying to lift rather than for its weight, because uplift is the governing case on a light surface.
PVDF-lacquered PVC; PTFE-glass for permanent or civic structures. That follows from the local conditions rather than a standard spec: here the design is driven by drainage comes first, followed by detailing for Zone V seismic loads. Membranes carry a five to fifteen year warranty depending on grade, with structure and workmanship covered for one year.
Most installed projects fall between ₹280 and ₹2,500 per sq ft plus GST, set by span, form, steel weight, foundations, membrane grade, height and site access. There is no flat Silchar premium: distance and access show up only in the logistics line of an itemised quote, which you see broken out rather than buried in a rate.
A typical car parking or walkway structure is fabricated in 10 to 15 working days and installed on site in 3 to 7 days; large-span roofs run three to six weeks end to end, with drawing approval usually the longest step. Footings are cast while the steel is still in the workshop, so the disruption on your Silchar site is short. The structure is fabricated in our Delhi NCR workshop, shipped, and installed by our own crew. We do not hand the site to a local subcontractor.
Start a project
Building in Silchar? Send us the site and size.
Tell us where it is, roughly how big, and what it has to cover. We come back with questions, options and the next step, which is usually a site survey.
or call +91 93159 45187