Vellore — Tamil Nadu
Car Parking Shades in Vellore.
A car parking tensile shade is a membrane roof cantilevered from one column line behind the bays, so the drive aisle and car doors stay clear. In Vellore, the design is driven by heat and shade. Canopies here exist to keep people and vehicles cool, so membrane solar reflectance and airflow under the roof are specified before drainage is.
IllustrativeWhat makes car parking shades in Vellore different?
In one of the hottest parts of Tamil Nadu, a car park shade is specified for what happens to the cars underneath. The membrane is a light colour chosen for solar reflectance, the roof is set high enough for air to move, and the steel is detailed for a wide daily temperature swing. Rain arrives with the north-east monsoon, which is what the falls are sized for. Hard rock near the surface keeps footings shallow.
In short
Reviewed October 2026
Do you build car parking shades in Vellore?
Yes. A car parking tensile shade is a membrane roof cantilevered from one column line behind the bays, so the drive aisle and car doors stay clear. Most are PVC or PVDF-coated polyester on galvanised steel, with 2.1–2.2 m clear height at the low edge. Installed cost usually falls within ₹280–2,500 per sq ft plus GST, set by span, steel and membrane grade. For Vellore specifically, heat and shade. Canopies here exist to keep people and vehicles cool, so membrane solar reflectance and airflow under the roof are specified before drainage is sets the engineering, and pVDF-lacquered PVC in light colours for solar reflectance; PTFE-glass for permanent institutional work.
- City
- Vellore, Tamil Nadu
- What drives it
- Heat and shade
- Usual membrane
- PVDF-lacquered PVC in light colours for solar reflectance
- Price range
- ₹280–2,500 / sq ft + GST
- ISO 9001:2015Certified manufacturer
- Since 1998Building membrane structures
- One teamDesign, fabrication and installation
- In writing1-yr structure, 5–15-yr membrane warranty
- ItemisedQuote after a site survey
Designing for Vellore
What the site does to the design.
The design wind pressure is worked out for your exact site under IS 875 (Part 3), from its terrain, height and exposure. We do not take a city figure off a list.
Among the hottest cities in the state, regularly above 40 °C in May.
Rain mainly from the north-east monsoon, October to December.
Dry and dusty for most of the rest of the year.
- Ground
- Hard rock close to the surface across most of the city, with Palar riverbed sand through the valley. Footings are usually shallow once the rock is reached.
- What drives the design
- Heat and shade. Canopies here exist to keep people and vehicles cool, so membrane solar reflectance and airflow under the roof are specified before drainage is.
- Membrane
- PVDF-lacquered PVC in light colours for solar reflectance; PTFE-glass for permanent institutional work.
The structure
Car Parking Shades in detail.
Cover for every bay without a column in the way of a door or a reversing car. Cantilever, back-to-back and multi-bay layouts, from one row to a full campus lot.
Everything about car parking shades- Bay module
- 2.5 × 5 m per car
- Clear height
- 2.1–2.2 m at the low edge
- Wind design basis
- 150 km/h, checked per site
Four layouts cover almost every site.
Which form suits the site.
A car park shade is almost always a cantilever. One column line behind the bays, and a clear front edge over the aisle.
Single-row cantilever
One line of columns behind the bays; the membrane reaches forward over the cars and the aisle. The default against a wall or boundary.
Back-to-back butterfly
Two rows of bays share one column line and a valley gutter between them. The most efficient steel per car on an open lot.
Multi-bay grid
A repeating frame covers a large lot in both directions, with the columns running down the aisles so the bays stay clear.
Conical or hypar feature
For a forecourt or entrance drop-off, a cone or saddle gives the same cover with a more architectural roofline.
| Structure | Single-row cantilever, back-to-back butterfly, multi-bay grid, or conical / hypar feature |
|---|---|
| Membrane | PVC-coated polyester for most lots; PVDF-lacquered where the finish has to last longer |
| Frame | Galvanised steel, painted to the chosen colour |
| Drainage | To the low front edge or a valley gutter, piped down inside a column |
| Foundations | Isolated footings sized for wind uplift and overturning |
| Clear height | 2.1–2.2 m for cars; raised for SUVs, pickups or roof boxes |
| Warranty | One year on structure and workmanship; five to fifteen years on the membrane, by fabric grade |
What does car parking shades in Vellore cost?
Most installed projects fall between ₹280 and ₹2,500 per sq ft plus GST, set by span, form, steel weight, foundations, membrane grade, height and site access. There is no flat Vellore premium; distance and access appear only in the logistics line of an itemised quote.
Also built in Vellore
Start a project
Covering something in Vellore? Send us the size and the site.
Tell us where it is, roughly how big, and what it has to cover. We come back with questions, options and the next step, which is usually a site survey.
or call +91 93159 45187